Cleaning Instructions
Note: Always wipe with the grain.

– Dust with a damp, soft cloth and dry the surface completely.
– If needed, clean with a small amount of non-alkaline dish soap in warm water. Avoid waxes, solvents, ammonia, and other chemicals.
– Frequent polishing is not recommended. If needed, use a no-wax liquid polish on a soft cloth. Immediately buff surface until dry. Before re-polishing, eliminate existing polish with a wax remover. If not removed, surface could appear streaky.

Care Instructions
– Immediately blot any liquids from the surface.
– Avoid extreme heat, cold, or wide humidity variances. Prolonged sunlight could affect the color of the wood beneath the finish.
– Use a desk pad to protect furniture from possible damage caused by pens and sharp objects.
– If using a protective glass top, place felt or cork spacers under the glass to allow the wood to breathe.
– Prolonged contact with plastic, vinyl, or rubber items may cause deterioration of the finish due to a chemical reaction. Place felt pads under these items to protect the wood surface.

For more information on care and maintenance of wood furniture please visit: http://www.kimballoffice.com/resources/care-maintenance.aspx

Kimball Office “Wood Surfaces Cleaning and Care Instructions.” http://www.kimballoffice.com/office-furniture-Desks/Definition/care-maintenance.aspx, 22 June 2010.